Replacing A Hot-Plug Hard Disk - HP StoreOnce 3100 Maintenance And Service Manual

Table 17: Disk types
Disk
900GB entry SAS Level HDD
4 TB HDD
4 TB HDD
2 TB HDD

Replacing a hot-plug hard disk

Procedure
1. Identify the disk that has failed as described above.
NOTE:
Remember you can use the Beacon LED to identify the physical disk in the storage controller or
expansion shelves.
2. Remove the disk.
a. Press the hard disk carrier button (1) to release the ejector lever.
b. Pull out the disk carrier handle and slide the hard drive assembly out of the drive bay. Be sure to
support the drive when pulling it out of the cage.
60 Replacing a hot-plug hard disk
Where used
HPE StoreOnce 5100 System (2
disks), head server unit, rear disk
bays
HPE StoreOnce 5100 System (12
disks), head server unit, front disk
bays
HPE StoreOnce 3540 System (12
disks)
HPE StoreOnce 5100 System (12
disks), capacity upgrade
expansion
HPE StoreOnce 3520 System (12
disks)
HPE StoreOnce 3100 System (4
disks)
Spares Part Number
653971-001
695842-001
844894-001
653948-001