Compaq Presario 305 Maintenance & Service Manual page 49

Compaq.com Compaq Presario Maintenance and Service Guide - 305
Configure options
Update time, date, or password information
To run Computer Setup:
Go to the Compaq Utilities menu and select the Computer Setup option. Follow the on-screen instructions to
complete your chosen task.
Computer Checkup (TEST)
Computer Checkup (TEST) determines whether the various computer components and
devices are recognized by the system and are functioning properly. You can display, print,
or save the information generated by Computer Checkup.
To run Computer Checkup, follow these steps:
1. Plug the computer into an external power source. A low battery condition can interrupt
the program.
2. Connect the printer if you want to print a log of error messages.
3. Turn on the external devices that you want to test.
4. Insert the Compaq Diagnostics diskette in drive A.
5. Turn on or restart the computer. The computer starts from drive A, and the
Diagnostics Welcome screen appears.
6. Press Enter to continue. The Diagnostics menu appears.
7. Select Computer Checkup from the Diagnostics menu. A Test Option menu appears.
8. Select View the Device List from the Test Option menu. A list of the installed
Compaq devices appears.
9. If the list of installed devices is correct, select OK. The Test Option menu appears.
If the list is incorrect, ensure that any
NOTE:
new devices are installed properly.
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20checked%20ok/NOTEBOOKS/PRESARIO%20305/cpqdiag.html (2 of 4)6/27/2004 2:16:32 AM