Paging Procedures; Sending A Page - Motorola MTS 2000 Operation Manual

Paging Procedures

The Page feature lets your radio function like a pager [beeper]. The radio can
receive and respond to pages from other radios [not telephones], and send pages
to them.
The Page feature operates across Talkgroups. The radio ID Number of the
person paging you can be displayed by depressing your Page button. To respond
to a page when the paging radio is in a different Talkgroup, select the caller's
Talkgroup. Follow normal transmission procedures as previously described.
(Note: return to home Talkgroup when finished.)

Sending a Page

You Do
1a. Press the Page Button
[middle button].
2. There are 2 ways to enter an ID #:
a. If you do nothing else, the last
number transmitted or received
will be sent out.
OR
b. Enter the new 6-digit ID number
from the keypad.
Note: Once you have started enter-
ing numbers, the left arrow key [<]
will function as a backspace key.
3. Press the PTT Switch to send the
ID number.
(continued on next page)
Section II
30
The display shows the last ID number
transmitted or received.
The display changes to show the num-
bers as they are being entered. The
cursor will flash to indicate the loca-
tion of the next digit to be entered.
If fewer than 6 digits are entered and
the PTT Switch is pressed, you will
hear a bad-keypress tone and the dis-
play will show "INVALID ENTRY." A
bad-keypress tone will also be heard if
you try to enter a seventh digit.
The ID number is transmitted.
Snohomish County PUD Radio Operations Manual • Rev. 6/03
The Radio Does