Anti-Theft Device - PEUGEOT ELYSTAR Owner's Manual

Anti-theft device *

- Removal of anti-theft device
- Put the key into the lock, turn it , and pull the
1
protective flap in order to remove the anti-theft
device.
- Locking the anti-theft device
(the key must be in the lock). Unclip part 1 from its
housing, slide it along the cable, wrap the cable
around a fixed point (metal post, 2-wheeler parking
stand, ....)
1
- Turn the key and insert part into part ,
2
- Turn the key , remove it and make sure
that the protection flap is correctly in position.
- Storing the anti-theft device
- Put the key into the lock, turn it and separate
1
parts and .
2
- Slide part along the cable and store it away in
1
the housing of part .
2
- Push the whole unit until it is positioned in the rear
part of the scooter.
- Withdraw the key and make sure that the protec-
tion flap is closed correctly.
Advice
1
- When the scooter is parked, avoid leaving the
anti-theft device in contact with the ground.
- When cleaning the scooter, avoid pointing the
2
water hose into the lock.
- Maintenance of the tube : use a plastic siliconed
cleaning product.
Caution
- Do not forget to store the anti-theft device
carefully in its housing before using the
vehicle.
* According to the model
Elystar 50
15