Integral Braking - PEUGEOT ELYSTAR Owner's Manual

!
Elystar 50
Integral braking (SBC)
PEUGEOT recommends that you :
- Check the level of brake fluid
- Check the state of wear of the brake pads
- Monitor operation of your FRONT and REAR
brakes.
- Have maintenance operations performed by a
PEUGEOT dealer whenever action proves to be
necessary
- Use PEUGEOT original parts only.
The hydraulic circuit is filled with fluid in compliance with
the PEUGEOT standard.
- The fluid level in the hydraulic control,
- The circuit seal,
- The state of the brake pads,
If the brake lever appears "loose" when activated, take the
vehicle in for a service of the system by a PEUGEOT
dealer as quickly as possible.
- For the motor vehicles fitted out with an integral
braking, an action on the left lever activates
simultaneously the front and rear brakes.
In this way, the right hand is used to activate the gas and
the left hand to activate the brakes.
- The brake lever of the right handle is still present but
has to be considered as an emergency brake.
- The use of the single brake at the right handle is
only efficacious to slow down the vehicle and
doesn't stop it in case of emergency.
If the complete braking system is declining, reduce
the speed and go directly to the closest Peugeot
dealer.
- For an optimum result, Peugeot Motocycles
recommends you to respect the original assembly
tire.
- For an optimum result, Peugeot Motocy-
cles recommends you to respect the origi-
nal assembly tire.
13
Use
Warning
Reminder