Anti-Theft Device - PEUGEOT ELYSEO 125 Manual

Anti-theft device *

1
- Removal of anti-theft device
- Put the key into the lock, turn it , and pull the
protective flap in order to remove the anti-theft
device.
- Locking the anti-theft device
1
(the key must be in the lock). Unclip part from its
housing, slide it along the cable, wrap the cable
around a fixed point (metal post, 2-wheeler parking
stand, ....)
1
- Turn the key and insert part into part 2 ,
- Turn the key , remove it and make sure
that the protection flap is correctly in position.
3
- Storing the anti-theft device
- Put the key into the lock, turn it and separate
1
parts and 2 .
- Slide part along the cable and store it away in
1
the housing of part .
2
- Push the whole unit until it is positioned in the rear
part of the scooter.
1
- Withdraw the key and make sure that the protec-
tion flap 3 is closed correctly.
Advice
2
- When the scooter is parked, avoid leaving the anti-
theft device in contact with the ground.
- When cleaning the scooter, avoid pointing the water
hose into the lock.
- Maintenance of the tube : use a plastic siliconed
cleaning product.
Caution
- Do not forget to store the anti-theft device
carefully in its housing before using the vehicle.
- Placing the theft protection device around the
rear wheel may damage the number plate.
3
* According to the model
17