Removing The Wwan Card; Prerequisites; Procedure - Dell Embedded Box PC5000 Service Manual

Removing the WWAN card

WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box
Embedded Box PC, follow the steps in
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the PCI/PCIe card

Procedure

1 Disconnect the antenna cables connected to the WWAN card.
2 Remove the screws that secure the WWAN card to the system board.
68
After working inside your Embedded
"Removing the back
(if installed).
PC. After working inside your
cover".