Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
3.5-inch hard
5. Remove the
disk-drive
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
Figure 27. Removing the wireless card
Steps
1. Remove the screw (M2x3.5) that secures the wireless-card bracket to the system board.
2. Slide and lift the wireless-card bracket off the wireless card.
3. Disconnect the antenna cables from the wireless card.
4. Slide and remove the wireless card from the wireless-card slot (M.2 WLAN) on the system board.
68
Removing and installing Customer Replaceable Units (CRUs)
Before working inside your
drive, if applicable.
cage.
computer.
Restricted - Confidential