Removing The Top Cover; Prerequisites; Procedure - Dell Embedded Box PC5000 Service Manual

Removing the top cover

WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box
Embedded Box PC, follow the steps in
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the PCI/PCIe card
3 Remove the CANbus
4 Remove the riser
5 Remove the power

Procedure

1 Disconnect the power-switch cable and remove it from the routing guides on the
chassis.
"Removing the back
(if installed).
cable.
card.
connectors.
PC. After working inside your
After working inside your Embedded
cover".
109