3
Replace the M2x2.5 screw to secure the heat sink to the chassis.
4
Install the:
a
system board shield
b
back cover
c
optical drive
d
stand
5
Follow the procedure in
System fan
Removing system fan (35 W optional)
1
Follow the procedure in
2
Remove the:
a
stand
b
optical drive
c
back cover
d
system board shield
3
To remove system fan:
a
Disconnect the system fan cable [1].
b Remove the M3.5x5 screws that secure the system fan to the system board [2].
c
Lift the system fan away from the computer [3].
Installing system fan (35 W optional)
1
Place the system fan to align with the screw holders on the chassis.
2
Replace the M3.5x5 screws to secure the system fan to the chassis.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
21