Epson EB-145OUI User Manual page 103

Whiteboard Screens (Whiteboard Mode)
b Select the following email settings on the Mail screen.
Enter the email address for the recipient using the displayed on-screen
keyboard. The email address you set is stored until you create a new
meeting or turn off the projector.
When you set Disallow Address Input to On in
a
the projector's Whiteboard Settings menu, you
cannot enter the email address directly. Set
Disallow Address Input to Off first.
s Extended > Whiteboard Settings > Mail >
Disallow Address Input
Enter the subject for the email.
B
Select the format for the attached file (PDF, PNG, or EWF).
C
For PDFs or EWFs, select the check box and enter a password to encrypt
D
the file.
Attention
• When you enter a password, it is displayed on the screen.
• When encrypting a file, make sure you do not forget the
password.
Set the range of pages that you want to send.
E
Enter the file name for the attachment.
F
Specify the email address for the recipient using the displayed E-mail
G
Address dialog box. You can specify up to 50 addresses.
You can set the address book using the Web Control screen or the
directory service in the projector's Whiteboard Settings menu.
s Extended > Whiteboard Settings > Directory Settings
c Select Send.
• If there is a lot of content on the projected screen, it may take a
a
while to send the email.
• You may not be able to send the email depending on the
destination mail server settings. Contact your network
administrator about the mail server settings in advance.
103