Table of Contents
Advertisement
Preparing Before Using Interactive Features
c
Select Manual Calibration and press the [Enter] button.
The following screen appears.
d
Adjust the focus, if necessary, by opening the air filter cover on the side
of the projector and sliding the focus lever.
e
Select Yes and press the [Enter] button.
A flashing green circle appears in the upper left corner of your
projected image.
f
Touch the center of the circle with the tip of the pen.
The circle disappears, and you see another circle below the first one.
For the most accurate calibration, make sure you touch the
a
center of the circle.
84
Advertisement
Table of Contents
