Epson EB-145OUI User Manual page 223

Projector Setup Settings - Extended Menu
Extended > Whiteboard Settings > Directory Settings
s
Setting Options
Enable Directory On
Access
Off
Search Base DN Up to 63
alphanumeric
characters
(do not use : and
spaces)
User Attributes Up to 63
alphanumeric
characters
(do not use : and
spaces)
Description
Set to On to search for user names and
email addresses from a directory service.
Specify the DN (Distinguished Name)
where the search for user names and
email addresses should start. Make sure
you specify all OU (Organizational Unit)
and DC (Domain Component) as
necessary in the order of OU then DC;
for example,
"OU=accounts,DC=example,DC=com".
The DN must be at or below the DC level
in the database structure.
Specify the attribute for user name; for
example, "cn".
Setting Options
Mail Attributes Up to 63
alphanumeric
characters
(do not use : and
spaces)
Directory Server
Settings
LDAP Server
Port Number
Authentication
User name
Password
Check Connection
223
Description
Specify the attribute for mail address; for
example, "mail".
Configures your directory server.
LDAP Server: enter the IP address or
FQDN (Fully Qualified Domain Name)
for the LDAP server. You can enter up to
63 alphanumeric characters (you cannot
use " * + , : ; < = > ? [ \ ] ` | and spaces).
You cannot use the following IP
addresses: 127.x.x.x, 192.9.2.x, or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255). If
you specify an FQDN, you must
configure a DNS server.
Port Number: enter a port number for
the LDAP server. The default port is 389.
Authentication: sets the type of
authentication expected by the LDAP
server. If you want to select Digest-MD5
as an authentication method when an IP
address is set for LDAP Server, you must
configure the DNS server to enable
reverse DNS lookup.
User name: enter a user name for the
LDAP server. You can enter up to 64
alphanumeric characters (you cannot
use : and spaces).
Password: enter a password for the
LDAP server. You can enter up to 64
alphanumeric characters (you cannot
use : and spaces).
Check Connection: tests the network
connection.