Table of Contents
Advertisement
11
Input
11
Program management
.01
The program numbers which are saved in the machine memory or on the SD card are
displayed in program management. The programs can be deleted or copied. Conventional
SD memory cards up to a maximum of 2GB can be inserted into the control panel. The
machine data is saved in the file "MD" in the subdirectory \P3511. The programs are saved in
the directory \P3511 in the files 01 – 99.
The insertion and removal of the SD memory card is described in chapter 9.08 Inserting
and removing the SD memory card.
If SD memory cards are to be formatted using a PC, they must be formatted in "FAT16" for-
mat. Alternatively, the SD memory card can also be formatted using the formatting function
on the corresponding machine, see chapter 11.01.10
Formatting the SD memory card.
11
Calling up program management
.01.01
O Switch the machine on.
O Call up manual sewing if required. (The LED in the key does not light up.)
2x
O Press the TE key twice
O Program management is called up by pressing the scroll key.
DIR
After calling up program management, the first menu item appears (display of the program
in the machine memory).
Confirm selection of the menu item by pressing the right plus key.
Further menu items can be scrolled through by pressing the left +/- keys, see the following
chapter.
The following menu items are available in program management:
O Display of the program in the machine memory
O Display of the program and the machine data on the inserted SD memory card
O Copying of single programs and the machine data onto the SD memory card
O Copying of all programs and the machine data onto the SD memory card
O Copying of single programs and the machine data in the machine memory
O Copying of all programs and the machine data in the machine memory
O Deleting programs in the machine memory
O Deleting programs and machine data on the SD memory card
O Formatting the SD memory card
Input
47
Advertisement
Table of Contents
