Table of Contents
Advertisement
11
Parameter settings
.02
11
Selecting the user level
.02.01
O Switch the machine on.
O Call up manual sewing if required. (The LED in the key does not light up.)
O Call up parameter entry.
O Call up parameter "798" by pressing the corresponding +/- keys (P) or (S) .
O Enter the corresponding value for the desired user level by pressing the +/- keys (L):
O Press the TE key to complete the selection.
By default, the machine is in user level "a" when it is switched on. The following
section describes how to call up the service level "c" via the mechanic level "b".
Set values in the parameters of user levels "b" and "c" may only be changed by
trained technical staff!
660a
0
798a
0
0
=
Operator level "a"
1
=
Mechanic level "b"
11 =
Service level "c"
The operator level "a" is active again after switching the machine off and on
again. The corresponding letter "a", "b" or "c" for the current user level is shown
on the display.
Input
57
Advertisement
Table of Contents
