HP 5920 series Configuration Manual page 46

0011.2200.1201
0011.2200.1201
0011.2200.1301
0011.2200.1301
0011.2200.1501
0011.2200.1501
# Verify that the BCB has created multicast FDB entries in both B-VLANs 10 and 20 for I-SID
1000.
<BCB1> display spbm multicast-fdb
Flags: E-Egress T-Transit
System ID
0011.2200.1101
0011.2200.1101
0011.2200.1201
0011.2200.1201
0011.2200.1301
0011.2200.1301
2. Verify the configuration and forwarding states after ECT migration is complete:
On BEBs (BEB 1 in this example):
# Verify that I-SID 1000 has migrated from ECT algorithm 3 to ECT algorithm 2. SPBM has
removed the mapping between I-SID 1000 and B-VLAN 10.
<BEB1> display spbm ect-migration i-sid 1000
ECT
00-80-c2-03
# Verify that the BEB has unicast PWs only on B-VLAN 20 for I-SID 1000. The BEB has removed
the PWs set up on B-VLAN 10 for I-SID 1000.
<BEB1> display spbm unicast-pw
System ID
0011.2200.1201
0011.2200.1301
# Verify that the BEB has set up a multicast PW on B-VLAN 20 for I-SID 1000. The original
multicast PW has been removed.
<BEB1> display spbm multicast-pw
System ID
0011.2200.1101
# Verify that the BEB has unicast FDB entries for both B-VLANs 10 and 20. The BEB still has
unicast FDB entries for B-VLAN 10 because B-VLAN 10 is still on MSTI 4092.
<BEB1> display spbm unicast-fdb
Flags: E-Egress T-Transit
0011-2200-1201
0011-2200-1201
0011-2200-1301
0011-2200-1301
0011-2200-1501
0011-2200-1501
MAC address
0306-4000-03e8
0306-4000-03e8
0306-4001-03e8
0306-4001-03e8
0306-4002-03e8
0306-4002-03e8
B-VLAN T R
20 1 1
I-SID B-MAC
1000 0011-2200-1201
1000 0011-2200-1301
I-SID MAC address
1000 0306-4000-03e8
42
10 T XGE1/0/2
20 T XGE1/0/2
10 T XGE1/0/3
20 T XGE1/0/3
10 T XGE1/0/1
20 T XGE1/0/3
B-VLAN Flags Port
10 T XGE1/0/2
XGE1/0/3
20 T XGE1/0/2
XGE1/0/3
10 T XGE1/0/1
XGE1/0/3
20 T XGE1/0/1
XGE1/0/3
10 T XGE1/0/1
XGE1/0/2
20 T XGE1/0/1
XGE1/0/2
B-VLAN
20
20
B-VLAN
20
Port
XGE1/0/3
XGE1/0/3
Port
XGE1/0/3