Product Specifications - Planet WNAP-W2201A User Manual

1.4 Product Specifications

Product
Hardware Specifications
Interface
PoE
Antenna
Reset Button
LED Indicators
Material
Dimensions (W x D x H)
Weight
Power Requirements
Power Consumption
Wireless interface Specifications
Standard
Frequency Band
Operating Channel
Channel Width
Data Transmission
Rates
Transmission Distance
Max. RF Power
Receiver Sensitivity
Data Rate
TX Power
WNAP-W2201A
300Mbps 802.11n Wireless In-wall PoE Access Point
1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
PoE Port
※ IEEE 802.3af PoE PD Port
LAN Port 1 x 10/100Mbps auto MDI/MDI-X RJ45 port
RJ11 Port Connect to the telephone through the 4-conductor phone line
802.3af PoE PD, Class 3
Built-in 3dBi antenna x 2
Reset button on side panel
(Press over 5 seconds to reset the device to factory default)
PWR/SYS LED
Plastic
86 x 35 x 86 mm
76g
802.3af/at PoE, 48-56V DC input, 0.35A (max.)
< 10W
Compliant with IEEE 802.11b/g/n
Europe -- ETSI: 2.412~2.472GHz
Europe -- ETSI: 1~13
20 or 20/40MHz
802.11n (HT40): 270/243/216/162/108/81/54/27Mbps
135/121.5/108/81/54/40.5/27/13.5Mbps (dynamic)
802.11n (HT20): 130/117/104/78/52/39/26/13Mbps
65/58.5/52/39/26/19.5/13/6.5Mbps (dynamic)
802.11g: 54/48/36/24/18/12/9/6Mbps (dynamic)
802.11b: 11/5.5/2/1Mbps (dynamic)
802.11n: up to 70m
802.11g: up to 30m
The estimated transmission distance is based on the theory.
The actual distance will vary in different environments.
802.11n: 17 ± 2dBm
802.11g: 17 ± 2dBm
802.11b: 18 ± 2dBm
IEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8%
IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10%
IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10%
IEEE 802.11b: 1/2/5.5/11Mbps
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
IEEE 802.11n: 300 Mbps in 40MHz mode/150Mbps in 20MHz mode
Provides 5-level Tx Power Control (100%, 70%, 50%, 35%, 15%)
User Manual of WNAP-W2201A
-6-