Outline Of Operation Control By Microcomputer; Operation Control Function By Remote Controller - Mitsubishi Heavy Industries SRK06CJ Technical Manual & Parts List

1.7 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Operation control function by remote controller

Remote controller
S Operation section
FAN SPEED button
Each time the button is pushed, the
indicator is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
ON TIMER button
This button selects ON TIMER operation.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
Unit display section
HI POWER light (green)
Illuminates during HIGH POWER operation.
ECONO light (orange)
Illuminates during ECONOMY operation.
• The above illustration shows all controls, but in practice
only the relevant parts are shown.

- -
OPERATION MODE select button
Each time the button pushed, the
indicator is switched over in turn.
ON/OFF (luminous) button
Press for starting operation, press again
for stopping.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down) mode.
OFF TIMER button
This button selects OFF TIMER operation.
RESET switch
Switch for resetting microcomputer and
setting time.
CANCEL button
This button cancels the ON TIMER, OFF
TIMER, and SLEEP operation.
RUN light (green)
Illuminates during operation
and 'CLEAN operation'.
TIMER light (yellow)
Illuminates during TIMER operation.