Wired Remote Controller; 4-1.Display Section - Carrier 40TSV0131UP Owner's Manual

4-way cassette type
Table of Contents

Advertisement

4

Wired remote controller

This remote controller can control the operation of up to 8 indoor units.
4-1. Display section
In the display illustration below all the icons are shown. When the unit is in operation,
only relevant icons will be displayed.
• When the leak breaker is turned on for the first time,
part of the remote controller.
• While this icon is flashing, the model is being automatically confirmed.
Wait till
icon has disappeared to use the remote controller.
1
2
5
6
9
1
Operation mode
The selected operation mode is displayed.
2
Error display
Displayed while the protective device works or a error
occurs.
3
SETTING display
Displayed during setup of the timer or other settings.
4
TEST run display
Displayed during a test run.
5
Timer display
When an error occurs, error code is displayed.
6
Timer mode display
The selected timer mode is displayed.
7
Louver position display
Displays louver position.
8
Swing display
Displayed during up / down movement of the louver.
21-EN
1115350208_EN-TH.indb 11
1115350208_EN-TH.indb 11
flashes on the display
TEMP.
ON / OFF
TIMER SET
FAN
MODE
TIME
SAVE
VENT
FILTER
RESET
TEST
SET
CL
SWING/FIX
UNIT LOUVER
7
8
3
4
12
11
10
9
Filter display
Reminder to clean the air filter.
10
Fan speed display
The selected fan speed mode is displayed.
(Auto)
(High)
(Med.)
(Low)
11
Set temperature display
The selected set temperature is displayed.
12
Power saving mode display
Limits compressor speed (capacity) to save energy.
– 11 –
Display
section
Operation
section
17
19
20
13
UNIT No. display
Displays the number of the indoor unit selected.
Also displays error code of indoor and outdoor units.
14
Remote controller sensor display
Displayed while the sensor of the remote controller is
used.
15
No function display
Displayed when the function requested is not available
on that model.
16
Self clean operation display
Displayed during self clean operation to dry the indoor
heat exchanger.
16
13
14
18
15
17
Service display
18
Operation ready display
This display appears on some models.
19
Louver Number display.
(exapmle:01, 02, 03, 04)
20
Louver lock display
Displayed when there is a louver-locked unit in the
group (including 1 indoor unit by 1 outdoor unit).
22-EN
3/29/2559 BE 6:54 PM
3/29/2559 BE 6:54 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

40tsv0181up40tsv0241up40tsv0361up40tsv0401up

Table of Contents