Wired Remote Controller - Carrier 40VM Series Service Manual

Wired Remote Controller

MODEL SERIES 40VMF 40VMC 40VMI 40VMW 40VMM 40VMU 40VMH 40VMV
Remote Controller
(Programmable Controller)
Remote Controller
(Non-Programmable
Controller)
Fig. 37 —Names and Functions—40VM900002 (Non-Programmable Controller)
BUTTON
1. MODE
2. TEMP. UP button
3. ON/OFF button
4. LED (green)
5. Left button/ROOM TEMP button
6. TIMER button
7. Right button / SWING button
8. FAN
9. TEMP. DOWN button
10. OK button
Table 22 —Applicable Models for VRF Indoor Units
Table 23 —Functional Description
Stays solid green when the unit is powered on and blinks if there is an error
Sets the swing location and starts automatic swing/selects options to the right
40VM900003
40VM900002
DESCRIPTION
Selects the
running mode
Increases the set temperature
Powers the IDU on/off
Checks the room temperature
/ selects options to the left
Open timer settings
Selects the running mode
Reduces the set temperature
Confirms selection
25
40VML 40VMR 40VMA
X
5. Lef t button/
ROOM TEMP button
1. MODE
2. TEMP. UP button
3. ON/OFF button
4. LED
6. TIMER button
7. Right button/
SWING button
10. OK button
9. TEMP. DOWN
button
8. FAN
ERV
X