Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
CAUTION: To avoid damaging the wireless mini-card, do not place any
cables under it.
1
Connect the antenna cables to the wireless mini-card.
The following table provides the antenna-cable color scheme for the wireless
mini-card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
2
Slide the wireless-mini card bracket into the wireless card.
3
Align the notch on the wireless mini-card with the tab on the wireless mini-card
connector.
4
Press the other end of the wireless mini-card down and replace the screw that
secures the wireless mini-card to the system board.
Post-requisites
Replace the
computer
38
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
Antenna-cable color
White
Black
Before
www.dell.com/