Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the optical drive into the optical-drive bay through the front of the
computer.
2
Align the screw holes on the optical drive with the screw holes on the chassis.
3
Replace the screws that secure the optical drive to the chassis.
4
Connect the power and data cables to the optical drive.
NOTE: Repeat step 1 to step 4 to replace the secondary optical-drive, if
applicable.
Post-requisites
1
Replace the
front
2
Replace the
computer
computer. After working inside your computer, follow
After working inside your
bezel.
cover.
computer. For more safety best
www.dell.com/
Before
63