Removing the computer cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Lay the computer on its side with the computer cover facing up.
2
Remove the thumbscrew that secures the computer cover to the chassis, using
a screw driver if necessary.
3
Release the computer cover by sliding it away from the front of the computer.
4
Lift the cover away from the computer and set it aside.
1
thumbscrew
18
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
2
computer cover
Before