Prerequisites
Remove the
computer
Procedure
1
Locate the CMOS reset jumper (CMCLR) on the system board.
NOTE: For more information on the location of the CMOS jumper, see
"System-board
2
Remove the jumper plug from the password jumper-pins (PSWD) and connect it
to the CMOS jumper-pins.
3
Wait for 5 seconds and then replace the jumper plug to the password jumper-
pins (PSWD).
1
jumper plug
3
CMOS jumper-pins
Post-requisites
Replace the
computer
104
cover.
components".
cover.
2
password jumper-pins
(PSWD)