Panasonic KX-FP215 Service Manual page 89

12.3.3.1.3. Receive Problem
First confirm whether the recording paper is installed properly or not before starting troubleshooting. (Refer to "Remarks".)
Note:
• "596: Transmit level set" represents a service code. (Refer to Service Function Table (P.63).)
• #06 : Refer to for Program Mode Table (P.96) Fax ring count.
Remarks:
Regarding the reception problem, we have investigated the conceivable causes in the flow chart except for the software-related
errors. However, some troubles may occur due to the software-related problems such as "CHECK PAPER" when the fax
switches to the memory receiving mode and the memory capacity becomes full of the unprintable data. In this case, error mes-
sages [FAX MEMORY FULL] and its main cause, for example "CHECK PAPER" are displayed on the LCD. Once you solve the
main problem, [FAX MEMORY FULL] will be cancelled and the reception problem will be resolved.
LCD display messages indicating the error causes are shown below.
COVER OPEN
UNIT OVERHEATED (COVER OPEN, etc.)...Reset the unit.
PAPER JAMMED
Please refer to Error Messages-Display (P.71) for the above items. If it turns out to be a hardware deformity, please check
each sensor. (Refer to Test Mode (P.58).)
89
KX-FP215