Installing The Recording Paper - Panasonic KX-FP215 Service Manual

KX-FP215
8.6.

Installing the Recording Paper

The unit can hold up to 20 sheets of 60 g/m
to 24 lb) paper.
For superior results, we recommend Hammermill® Jet
Print paper.
1. Fan the paper to prevent paper jams.
2. Insert the paper gently, print-side down (
• Do not force the paper into the paper tray.
• If the paper is not inserted correctly, remove all of the
installed paper, and re-install it gently. Otherwise the
paper may jam.
Note:
• Remove all of the installed paper before adding paper.
Document requirements
2 2
to 90 g/m (16 lb
).
Document weight
• When faxing a Single sheet:
45 g/m
• When faxing a Multiple sheets:
60 g/m
Note:
• Remove clips, staples or other fasteners.
• Do not send the following types of documents. (Make a copy
of the document using another copier and send the copy.)
— Chemically treated paper such as carbon or carbonless
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen
• Check that ink, paste or correction fluid has dried
completely.
• To send a document with a width of less than 210 mm
(8
original document onto A4 or letter-sized paper, then
sending the copied document.
56
2 2
to 90 g/m (12 lb to 24 lb)
2 2
to 80 g/m (16 lb to 21 lb)
duplicating paper
through the other side, such as newsprint
1
/ "), we recommend using a copy machine to copy the
4