Panasonic KX-FP215 Service Manual page 69

11.2.3.1. Descriptions of the History Report
(1) SOFTWARE VERSION
FLASH ROM version
(2) SUM
FLASH ROM internal data calculation.
(3) YOUR LOGO
The user logo recorded in the unit. If it is not recorded,
NONE will be displayed.
(4) YOUR TELEPHONE NUMBER
The user telephone number recorded in the unit. If it is not
recorded, NONE will be displayed.
(5) FAX PAGER NUMBER
If you program a pager number into the unit, the pager
number will be displayed here.
(6) FACTORY - CUSTOMER
This shows how many days from factory production until the
user turns ON the unit.
(7) MONTH
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(8) DAY
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(9) YEAR
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(10) TIME
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(11) USAGE TIME
The amount of time the unit has been powered ON.
(12) FACTORY - NOW
This shows how many days from factory production until the
user prints out this history list.
(13) TEL MODE
The amount of time the TEL mode setting was used.
(14) FAX MODE
The amount of time the FAX mode setting was used.
(15) TEL/FAX MODE
The amount of time the TEL/FAX mode setting was used.
(16) ANS/FAX MODE
The amount of time the ANS/FAX mode setting was used.
(17) FINAL RECEIVE MODE
The last set receiving mode by the user.
(18) TONE/PULSE SELECTION
The most recently used setting used, either TONE or
PULSE.
(19) RECEIVE REDUCTION
The compression rate when receiving.
(20) SETTING NO. OF DIRECTORY
The recorded directory stations.
(21) NUMBER OF COPY
The number of pages copied.
(22) NUMBER OF RECEIVE
The number of pages received.
(23) NUMBER OF SENDING
The number of pages sent.
(24) NUMBER OF CALLER ID
The number of times Caller ID was received.
(25) NUMBER OF RECORDING MESSAGE
The number of messages recorded in TAM.
(26)~(29) Not Used
(30) NUMBER OF PRINTING WARNING LIST
The number of warning lists printed until now.
(31) NUMBER OF PRINTING HELP
The number of help lists printed until now.
(32) NUMBER OF DIVIDED PRINTING IN FAX RECEPTION
The number of faxes received that were divided into more
than one sheet since the unit was purchased.
(33) Not used
(34) FAX MODE
Means the unit received a fax message in the FAX mode.
(35) MAN RCV
Means the unit received a fax message by manual
operation.
(36) FRN RCV
Means the unit received a fax message by friendly signal
detection.
(37) VOX
Means the unit detected silence or no voice.
(38) RMT DTMF
Means the unit detected DTMF (Remote Fax activation
code) entered remotely.
(39) PAL DTMF
Means the unit detected DTMF (Remote Fax activation
code) entered by a parallel connected telephone.
(40) TURN-ON
Means the unit started to receive after 10 rings. (Remote
Turn On: Service Code #573)
(41) TIME OUT
Means the unit started to receive after Ring Time Out in
the EXT-TAM or TEL/FAX mode.
(42) IDENT
Means the unit detected Ring Detection.
(43) CNG OGM
Means the unit detected the CNG while it was sending the
Dummy Ring Back Tone in the TEL/FAX mode, or while
answering a call in the EXT-TAM mode. Or means the unit
detected the CNG while it was sending the OGM in the
ANS/FAX mode.
(44) CNG ICM
Means the unit detected the CNG while it was recording
the ICM in the ANS/FAX mode.
69
KX-FP215