Lexmark 5400 SERIES User Manual page 114

Computer not connected
Could not detect a proof sheet.
Error 1104
Failed to Connect
(phone line checklist)
Failed to Connect
(check that printer detects dial tone)
Make sure your computer is connected and turned on.
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the USB
port on the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the
USB port of the computer.
The USB port is marked with
If you are using an ENA, make sure it is connected. For more
information, see the print server documentation.
The document placed on the scanner glass is not a valid proof
sheet. For more information, see 第 57 页"使用样张页打印
保存在存储设备中的照片".
1
Remove the print cartridges.
2
Reinstall the black cartridge or the photo cartridge in the
left carrier.
3
Reinstall the color cartridge in the right carrier.
Resend the fax. There may have been a problem with the
quality of the telephone line connection.
Place a test call to the telephone number to which you want
to send a fax to make sure that it is working correctly.
If the telephone line is being used by another device, wait until
the other device is finished before sending the fax.
Make sure the printer is detecting a dial tone.
See 第 73 页"收听电话时发送传真（免提拨号）".
•
•
Check the Dial Method setting.
1
Listen for a dial tone. If you hear a dial tone, but the
printer hangs up without dialing, this means it did not
recognize the dial tone.
2
From the control panel, press Fax Mode.
3
Press .
4
Press or repeatedly until Fax Setup appears.
5
Press .
6
Press or repeatedly until Dialing and
Sending appears.
7
Press .
8
Press or repeatedly until Dial Method appears.
9
Press .
10
Press or repeatedly until the method you want
appears.
11
Press to save this setting.
Troubleshooting
114
.