Preparation; How To Access The Object Component - Brother MFC7050C Service Manual

n n

Preparation

Prior to proceeding to the disassembly procedure,
(1) Unplug
- the modular jack of the telephone line,
- the modular jack of the curled cord (and remove the handset),
- the PC interface cable, and
- the modular jack of an external telephone set if connected. (Not shown below.)
(2) Remove
- the document wire extension
- the document tray,
- the paper tray, and
- the ink cartridges if loaded. (Not shown below.)
n n

How to Access the Object Component

• On the next page is a disassembly order flow which helps you access the object components.
To remove the paper feed motor, for example, first find it on the flow and learn its number (
in this case). You need to remove parts numbered
as to access the paper feed motor.
• Unless otherwise specified, the disassembled parts or components should be reassembled in
the reverse order of removal.
, ,
IV - 3
, , , , , , , , and so