Preparation; How To Access The Object Component; Pages; Color - Brother FAX1170 Service Manual

Preparation

Prior to proceeding to the disassembly procedure,
(1) Unplug
- the modular jack of the telephone line,
- the modular jack of the curled cord (and remove the handset),
- the BT modular jack adapter if mounted, and
- the modular jack of an external telephone set if mounted. (Not shown below.)
(2) Remove
- the paper wire extension,
- the paper support,
- the document support,
- the document ejection tray, and
- the ribbon cartridge.
Handset and
curled cord*
Telephone
line cord
BT modular jack
adapter
(provided on the
New Zealand
version)
Document
ejection tray

How to Access the Object Component

• On the next page is a disassembly order flow which helps you access the object compo-
nent. To remove the separation roller, for example, first find it on the flow and learn its
number (I in this case). You need to remove parts numbered 1, :, B, C, D, E, F,
G, and H so as to access the separation roller.
• Unless otherwise specified, the disassembled parts or components should be reas-
sembled in the reverse order of removal.
Ribbon cartridge
IV – 3
Document support
Paper support
Paper wire
extension
(* Not provided on the FAX1010)