Zoom G3Xn Operation Manual page 43

Calibrating the
■ Calibrating the sensitivity
• Turn the power switch ON while pressing
• Operate the pedal as instructed on the display, and press
required.
• "Complete!" will appear before play mode becomes active.
NOTE
Calibrate in the following cases.
−Stepping on the pedal has little effect.
−The volume and tone changes greatly even when the pedal is only pressed lightly.
■ Adjusting the torque
• Insert the hex key into the torque adjustment screw on the side of the pedal.
Turn it clockwise to tighten the pedal, and turn it counterclockwise to loosen
the pedal.
Loosen Tighten
NOTE
Be careful when loosening a torque adjustment screw, because if you loosen it too much, it could come off
inside the unit, making it impossible to hold the pedal in place.
pedal
.
43
Using the pedal
when