Changing various settings
Setting the auto save function
Enable parameters to be saved automatically.
• On the SETUP screen, turn
• Press
• Turn
NOTE
When set to OFF , no patch or effect parameters will be saved automatically.
• Press
Note about switching patches
When AUTO SAVE is set to OFF, if you try to switch patches after changing any parameters, a
message will appear asking to save the parameter changes.
To save changes to parameters before switching patches, select YES. ( ¦ P19)
To discard changes to parameters before switching patches, select NO.
.
to set AUTO SAVE to ON/OFF .
to confirm the auto save setting.
to select AUTO SAVE.
26