Auto Install - Magnavox 27MT5005D, 27MT6005D, 32MT5015D, 32MT6015D User Manual

Y
ou can auto install programs on your TV. This makes it easy for you to select only the TV stations in your area
when the CHANNEL (+), (–) buttons are pressed.
Follow these steps for Digital Mode and Analog Mode
1
Complete the antenna or cable signal connection
before activating AUTO INSTALL. See How to
make the best connection guide for details.
2
Press MENU button on the remote control to
display the onscreen menu.
3
Press CURSOR < or > to scroll through the
onscreen menu until you see Install highlighted.
4
Press CURSOR > to display the Install menu
features.
5 Press CURSOR < or > to scroll through the
Install features until you see Auto Install highlighted.
6
Press CURSOR > to start Auto Installation.
7
Auto Install will begin. This may take 20 to 40
minutes depending on the number
of channels available.
8
When finished, press MENU button on the remote
control twice to exit the menu display from
the TV screen.
H
ELPFUL
When CABLE is selected, channels 1-135 are
available in Digital Mode and Channels 1-125 are
available in Analog Mode.
When ANTENNA is selected, channels 2-69 are
available for both Digital and Analog Modes.
When you install in either Digital or Analog
mode, both Digital and Analog channels will be
installed.

AUTO INSTALL

H
INTS
Digital Mode
Language
Tuner Mode
Auto Install
DTV Setup
Install
Language
Tuner Mode
Auto Install
Auto Install
Analog channels 39
Digital Channels 45
9
Analog Mode
Language
Tuner Mode
Auto Install
Channel Edit
Install
Language
Tuner Mode
Auto Install
Channel Edit
Auto Install
Analog channels 39
Digital Channels 45
MENU
< >