How To Add Or Delete Weak Digital Signals - Magnavox 27MT5005D, 27MT6005D, 32MT5015D, 32MT6015D User Manual

HOW TO ADD OR DELETE WEAK DIGITAL SIGNAL
D
igital broadcasting is still new. It is not uncommon for a broadcaster to only send out a digital signal for part of
a day. The reception could also come and go. If you program your channels when the signal is not being sent
or is weak it will not be saved in your channel setup. However, using the WEAK DIG SIGNAL feature here you can
add those channels with weak or no signals to your channel list. Adding or deleting WEAK DIG SIGNAL can only be
done in Digital Mode.
1
Press MENU button on the remote
control to display the onscreen menu.
2
Press CURSOR < or > to scroll
through the onscreen menu until you
see DTV Setup highlighted.
3
Press CURSOR > to display the DTV
Setup menu features.
4
Press CURSOR < or > to
scroll through the DTV SETUP
features until you see Ch. Install
highlighted. Press CURSOR > to display
Ch. Install features.
5
Press CURSOR < or > to scroll
through the Ch. Install features until you
see Weak Dig Sig highlighted.
6
Press CURSOR > to display the Weak
Dig Sig options.
7 Use CURSOR < or > to highlight the
channel you wish to add or skip.
8
Use CURSOR > to toggle between
Added or Skipped. If Skipped is selected
the channels will be skipped when scrolling
channels with CH+ or CH-. If Added is
selected the channels will not be skipped when
scrolling channels with CH+ or CH-.
9
When finished, press MENU button
on the remote five times to exit the menu
from the TV screen.
H H
ELPFUL INTS
When no transmission is received
from the broadcaster, the message,
'NO PROGRAM' will appear on the
TV screen..
Digital Mode
DTV Setup
DTV Setup
Ch. Install Channel Edit
Digital Audio Weak Dig Sig
Timer AutoLock
Closed Caption Fact CH Reset
Emerg Alert
Ch. Install
Channel Edit
Weak Dig Sig
AutoLock
Fact CH Reset
Weak Dig Sig
5
6
Signal
Skipped
7
Strength
8
9
15
MENU
< >