Return your Product Registration Card today to get the very most from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure: *Proof of Purchase Returning the enclosed card guarantees...
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this TV near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
What is Digital Television (DTV)? Digital Television (DTV) is a relatively new type of broadcasting that promises to transform television viewing into a whole new experience. Digital technology is used to capture images and sound to deliver a better picture quality. DTV technology is also capable of multicasting and interactive capabilities.
Channel (+) or (–) buttons on your remote control (Pg. 12). Closed Captioning allows the viewer to read TV program dialogue or voice conversations as onscreen text. (Pg. 27). As an Energy Star® Partner, Philips Consumer Electronics has determined this product meets the Energy Star® guidelines for energy efficiency Energy Star®...
DESCRIPTION OF REMOTE CONTROL BUTTONS NUMERIC (0-9) Buttons - To select TV channels or enter values in the on- screen menu. For single channel entries, press the numbered button for the channel you desire. The TV will pause for a second or two before changing to the chosen channel.
BASIC TV AND REMOTE CONTROL OPERATION Press POWER button on the TV to turn it on. Pressing any button on the front panel of the TV will also turn the TV On. Press the VOLUME + to increase the sound level and VOLUME – to lower the sound level.
FIRST TIME YOU TURN ON THE TV he first time you turn on the new TV set, you will see a screen that helps you to auto install the programs. Follow the instructions on this screen to start auto installation. Digital and Analog auto installation will be performed at the same time.
ou can auto install programs on your TV. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (–) buttons are pressed. Follow these steps for Digital Mode and Analog Mode Complete the antenna or cable signal connection before activating AUTO INSTALL.
HOW TO USE THE LANGUAGE CONTROL or French and Spanish speaking TV owners an onscreen Language option is present. With the Language control you can set the TV’s on-screen menu to be shown in English, French, or Spanish. Follow these steps for Digital Mode and Analog Mode Press MENU button on the remote control to display the onscreen menu.
HOW TO USE THE TUNER MODE CONTROL he TUNER MODE control lets you change the TV input signal to ANTENNA or CABLE mode. It is important that you know which type of signal to look for (Cable or Antenna). Follow these steps for Digital Mode and Analog Mode Press MENU button on the remote control to display the onscreen menu.
CHANNEL EDIT (ADD OR DELETE CHANNELS) hannel Edit allows you to add or delete channels. Follow these steps for Digital Mode Press MENU on the remote control to display the onscreen menu Press CURSOR < or > to scroll through the onscreen menu until you see DTV Setup highlighted.
AUTO CHRON (SYNCHRONISATION OF TIME) uto Chron allows you to set the clock of the TV automatically for automatic selection, there will be queries for Channel, Time Zone and Day Light saving. After successful setup, Auto Chron will automatically maintain the correct time.
imer feature allows you to select the time zone you are in. This Feature is only available in Digital Mode Press MENU button on the remote control to display the onscreen menu. Press CURSOR < or > to scroll through the onscreen menu until you see DTV Setup highlighted.
HOW TO ADD OR DELETE WEAK DIGITAL SIGNAL igital broadcasting is still new. It is not uncommon for a broadcaster to only send out a digital signal for part of a day. The reception could also come and go. If you program your channels when the signal is not being sent or is weak it will not be saved in your channel setup.
EMERGENCY ALERT SETTING mergency Alert lets you display or discard emergency alerts for Low or Medium priority. This feature is only available in Digital mode. Press MENU button on the remote control to display the onscreen menu. Press CURSOR < or > to scroll through the onscreen menu until you see DTV Setup menu highlighted.
igital Audio allows you to switch to another audio language when it is available. This feature is only available in Digital Mode. Press MENU button on the remote control to display the onscreen menu. Press CURSOR < or > to scroll through the onscreen menu until you see DTV Setup highlighted.
o adjust your TV picture controls, select a channel and use the Picture Menu Controls listed below. Your selection is stored as Personal. Press MENU button on the remote control to display the onscreen menu. Press CURSOR < or > to until the Picture menu feature is highlighted.
o adjust your TV sound, use the Sound Menu Controls listed below. Your selection is stored as Personal. Press MENU button on the remote control to display the onscreen menu. Press CURSOR > to until the Sound menu feature is highlighted. Press CURSOR >...
UNDERSTANDING AUTOLOCK CONTROLS utoLock is a feature that lets the TV receive and process data sent by broadcasters or other program providers with program content advisory. When programmed by the viewer, a TV with AutoLock can respond to the content advisory and block program content that may be found objectionable (such as offensive language, violence, sexual situations, etc.).
utoLock allows the viewer to block out any channels. A channel blocked by the AutoLock control cannot be viewed until a correct access code is used to unlock the channel for viewing. Follow these steps for Digital Mode Press MENU button on the remote control to display the onscreen menu.
AUTOLOCK - BLOCKING CHANNELS fter you have set your personal access code (see previous page), you are now ready to select the channels you want to block. Follow these steps for Digital Mode After Setting your personal access code (see previous page), press CURSOR <...
BLOCK / CLEAR ALL CHANNELS AT THE SAME TIME fter blocking specific channels there may come a time when you want to block or clear all the channels at the same time. This can be done only after you have entered your access code and the AutoLock features are displayed on the screen (refer to page 21).
he AutoLock feature can block programs based on the Movie Industry ratings. Once you have entered your access code and the AutoLock features are displayed on the screen. Note: to access this Menu, for both Digital and Analog Mode, follow the steps for Analog Mode (refer to page 21). Follow these steps for Digital Mode Press CURSOR <...
he AutoLock feature can block programs based on the TV Industry ratings. When you have entered your access code and the AutoLock features are displayed on the screen. Note: to access this Menu, for both Digital and Analog Mode, follow the steps for Analog Mode (refer to page 21). Follow these steps for Digital Mode Press CURSOR <...
HOW TO USE THE TIMER MENU CONTROLS our television comes with an onscreen clock. The TV can also be set to turn on or off at a specific time and tune to a specific channel when it powers itself on. Press the MENU button on the remote control to display the onscreen menu.
CLOSE CAPTIONING DISPLAY IN DIGITAL MODE losed Captioning (CC) lets you read the voice content of TV programs on the TV screen. Designed to help the hearing impaired, this feature uses onscreen “text boxes” to show dialogue and conversations while the TV program is in progress.
CLOSE CAPTIONING IN ANALOG MODE lose captioning in analog mode allows you to select the close caption setting while watching analog transmission. Press the MENU button on the remote control to display the onscreen menu. Press the CURSOR < or > button until Features is highlighted.
HOW TO USE THE FORMAT CONTROL he format Control feature allows you to select the picture-format mode. Selecting a Picture Format Using the Remote Control Press FORMAT button on the remote control once to see the current picture- format mode. Press FORMAT button repeatedly on the remote control to select one of the screen format options namely 4:3, 4:3 Expand, 4:3...
Aspect Ratio The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie theatre (Widescreen).
Check this List of Symptoms and Suggested Steps To Take before requesting Service. You may be able to solve the problem yourself. If you face problems connecting the TV to external devices, please refer to the User Guide of the external device or call their service centers for help.
SYMPTOMS General TV is not responding to Remote Control General Remote control is not working General No Picture on the TV screen General TV Displays white lines in letterbox when viewing a DVD disc WARNING Concerning Stationary Images on the TV Screen: Do not leave stationary or letterbox images on screen for extended periods of time.
MAGNAVOX LIMITED WARRANTY Ninety (90) Days Labor & One (1) Year Parts & One (1) Years Display MAGNAVOX warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive repair on the product.