NordicTrack NTSY14016.0 User Manual page 21

Resistance—This
display will show the
resistance level for a
few seconds each time
the resistance level
changes.
Watts—This display
will show your approxi-
mate maximum power
output in watts for
each stroke.
Watts Meter—The
watts meter will light
up to provide a visual
representation of your
approximate maximum
power output in watts
for each stroke.
4. Wear the included chest heart rate monitor and
measure your heart rate if desired.
You can wear the included chest heart rate moni-
tor to measure your heart rate. To use the chest
heart rate monitor, see THE CHEST HEART RATE
MONITOR on page 17. Note: The console is
compatible with BLUETOOTH
monitors.
To connect your heart rate monitor to the console,
see HOW TO CONNECT YOUR HEART RATE
MONITOR TO THE CONSOLE on this page.
When your heart beat is detected, your heart rate
will be shown in the display.
5. Stop exercising and view your exercise
summary if desired.
A few moments after you stop exercising, the
console will pause and show your exercise
summary:
Calories (Cal)—This
display will show the
approximate number
of calories you have
burned during your
workout.
Magnum
ESYPF01914
Magnum Magnum
ESYPF01914 ESYPF01914
NTSY14016 NTSY14016
NTSY19916 NTSY19916
Smart heart rate
®
21
Average Maximum
Power Output
(Ave)—This display
will show your aver-
age maximum power
output in watts for your
workout.
Note: If you do not resume exercising after a few
moments, the workout information will be reset and
the display will turn off.
6. When you are finished exercising, turn off the
console.
Press the power button repeatedly to turn off the
console manually. The console will enter a pause
mode, display the exercise summary, enter a
countdown mode, and then reset the workout infor-
mation and turn off the display.
If the strength system is idle for several minutes,
the console will turn off automatically.
HOW TO CONNECT YOUR HEART RATE MONITOR
TO THE CONSOLE
The console is compatible with all BLUETOOTH Smart
heart rate monitors.
To connect your BLUETOOTH Smart heart rate moni-
tor to the console, press the Bluetooth Smart button on
the console; the console pairing number will appear in
the display. When a connection is established, the LED
on the console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the Bluetooth Smart button on the con-
sole until the LED on the console turns solid green.
Note: All BLUETOOTH connections between the
console and other devices (including any tablets, heart
rate monitors, and so forth) will be disconnected.
Magnum
ESYPF01914
NTSY14016
NTSY19916