Service
manual
Outlet air - Thermistor element (NTC sensor)
Function
The sensor measures the temperature in the outlet air and the signal is returned to the
Selecta PCB.
The selecta PCB turns the heating unit off when the outlet air thermistor indicates that
the required temperature has been reached.
The resistance of this device is normally 4 to 6 kOhms at 20°C and it drops as the
temperature increases.
The sensor A is mounted near the outlet air overheating thermostat, fig. 1.
Error codes
The following error codes are related to this section:
E04, E18
See Selecta Control Service Manual for more information.
1
Sensors and overheating thermostats
A
A
47