Overview; Symbols On The Machine; Proper Use; Safety Instructions - Kärcher HDS 698 C ECO Operating Instructions Manual

Overview

Device elements
Figure 1
1 Cover
2 Support for spray lance
3 Pouring vent for liquid softner
(under the appliance hood)
4 Oil level indicator
5 Manometer
6 Detergent dosing valve and filling open-
ing for detergent
7 Connection for water supply with filter
8 High pressure hose
9 Steering roller with fixed position brake
10 Hand spraygun
11 Pressure/ quantity regulation at the
hand spray gun
12 Spray lance
13 High-pressure nozzle (stainless steel)
14 Steam nozzle (brass)
15 Power supply
16 Pouring vent for fuel
17 Nameplate
18 Storage compartment for accessories
(e.g. steam nozzle)
(under the appliance hood)
19 Cover lock
20 High pressure connection
Operating field
Figure 2
1 Power switch
2 Indicator lamp for fuel shortage
3 Liquid softner indicator lamp
4 "Ready for use" indicator lamp
5 Indicator lamp for detergent
6 Indicator lamp exhaust temperature limiter

Symbols on the machine

High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at per-
sons, animals, live electrical equipment or
at the appliance itself.
20
Cleaning of: Machines, Vehicles, Struc-
tures, Tools, Facades, Terraces, Garden-
ing tools, etc.
Danger
Risk of injury! Follow the respective safety
regulations when operating at gas stations
or other dangerous areas.
Please do not let mineral oil contaminat-
ed waste water reach soil, water or the
sewage system. Perform engine cleaning
and bottom cleaning therefore only on
specified places with an oil trap.

Safety instructions

Please follow the national rules and
–
regulations for fuel spray jets of the re-
spective country.
Please follow the national rules and
–
regulations for accident prevention of
the respective country. Fuel spray jets
must be tested regularly and the results
of these tests must be documented in
writing.
The heating appliance of the machine is
–
an ignition plant. All national laws and
regulations about heating systems must
also be followed.
As per the applicable national guide-
–
lines, the first time this high-pressure
cleaner must be taken into operation by
a skilled person. KÄRCHER has al-
ready performed this initial start-up for
you and has documented it accordingly.
The documentation can be requested at
your KÄRCHER partner. Please have
the part and plant number of the appli-
ance available when enquiring about
the documentation.
We would like to point out that the appli-
–
ance must be repeatedly checked by a
skilled person as prescribed by the ap-
plicable national regulations. Please
contact your KÄRCHER partner.
– 2
EN

Proper use