Limiting Channel Position Selection - Grundig CUC 7305 Service Manual

CUC 7305
P+
6 VHF1
- ----- ---------- -------- ---- -------
0-9 TXT
P+
6 ----
- ----- ---------- -------- ---- -------
0-9 TXT
20
P+
14 VHF1
- ----- ---------- -------- ---- -------
0-9 TXT
GRUNDIG Service
SPECIAL SETTINGS

Limiting channel position selection

The ATS search stores all the television channels it finds and automatically "blocks" onto the first non-
-assigned channel position.
This means that only the found television channels can be selected with the step-by-step channel
position selection using
0 DEC1 This limit can also be manually entered. The example shows "blocking" after channel position 6.
1
Call up the menu by pressing the »
OK i
– The »Channel display« menu appears.
2 Select channel position 6 with the
3
Select display »VHF 1«, »VHF 3« or »UHF« with
setting »----«.
4 Save setting with
– Now only the first 5 channel positions (and channel position »AV«) can be selected with
,
or », «.
0 DEC1
– All the channel positions set including the "blocked" ones can stil be selected with
– If everything after channel position 11 is blocked, all channel positions can be seleced with
OK i
»0 ... 9 «.
SPECIAL SETTINGS
Manually Assigning Channel Positions
You only need this setting if, for example a new cable channel is offered and you want to retain your
specific channel position sequence (e.g. BBC1 = 1, BBC2 = 2 etc.).
The example shows a new television channel in the frequeny band »UHF« (Special channel
S 34-S 41, channel C 21-C 69 – 403 MHz – 860 MHz) to be set at channel position »14«.
1 Call up the menu by pressing the »
The settings are made with the help of the menu.
Positions can be selected with
P+ 1
VHF1
0 DEC0
DEC 0
OK i
0
Select the current setting with
__________________________________________________________
. ,
». « or », «.
« and then the »OK
i
». . « or », , « buttons.
E
»E
»OK « and end with » «.
i
_________________________________________________________________
« and then the »OK
i
F E
»F « or »E «:
– Channel position from 1 to 69;
– Frequency band
VHF 1 (45 MHz – 137 MHz, C02 – C04, S01 – S05),
VHF 3 (137 MHz – 403 MHz, C05 – C12, S06 – S33),
UHF (403 MHz – 860 MHz, S34 – S41, C21 – C69),
---- channel position limitation;
– Decoder, DEC 1 – Decoder on, DEC 0 – Decoder off;
– Television norm, (0 = PAL/BG,
= SECAM L') norm not suitable for GB market;
3
– Search.
. ,
». « or », «.
Allgemeiner Teil / General Section
« buttons.
. ,
« and with ». « or », « select the
.
». «
»0 ... 9 «.
« buttons.
1 = SECAM L, 2 = PAL/I,
21
1 - 17