Table of Contents
Advertisement
4.
To remove the boot designator, move the cursor to the disk and press
Alt+B. This controller will no longer have a disk designated as boot.
5.
To change the boot disk, move the cursor to the new boot disk and
press Alt+B. The boot designator will move to this disk.
The firmware must be configured correctly in order for the Alt+B feature
to work.
5.3.6
Global_Properties
From the Setup Utility screen, press <Ctrl+C) to enter the LSI Logic
Configuration, then select Global Properties. The Global Properties menu
allows you to change related settings.
LSI Logic Config Utility
Adapter List
Adapter
SAS1068
Esc = Exit Menu
Allt+N = Global Properties
Pause When Boot Alert Displayed
Sets whether to pause when the boot alert displays.
Configuration options: [Yes] [No]
LSI Logic Config Utility
Adapter List
Pause When Boot Alert Displayed
Boot Information Display Mode
Support Interrupt
Restore Defaults
Esc = Exit Menu
Allt+N = Adapter List
5-32
Global Properties
PCI
PCI
PCI
PCI
BUS
Dev
Fnc
Slot
05
03
00
00
F1/Shift+1 = Help
-/+ = Alter Boot Order
Global Properties
F1/Shift+1 = Help
-/+ = Change Item
v6.08.05.00 (2006.08.02)
FW Revision
Status
1.15.00.00-IR
Disabled
Ins/Del = Alter Boot List
v6.08.05.00 (2006.08.02)
[No]
[Display adapters & installed devices]
[Hook interrupt, the Default]
Chapter 5: RAID configuration
Boot
0
Advertisement
Table of Contents
