Table of Contents
Advertisement
2.
On the next screen that appears, select View Existing Array.
LSI Logic Config Utility
Select New Array Type -- SAS1068
Esc = Exit Menu
Enter = Choose array type to create
3.
The View Array screen appears. Here you can view properties of the
RAID array(s) created. If you have configured a hot spare, it will also
be listed. If you created more than one array, you may view the next
array by pressing <Alt+N>.
LSI Logic Config Utility
View Array -- SAS1068
Array Type
Identifier
Type
Scan Order
Size(MB)
Status
Manage Array
Slot
Device Identifier
Num
0
SEAGATE ST373454SS
2
SEAGATE ST373454SS
3
SEAGATE ST373454SS
Esc = Exit Menu
Enter = Select Item
5-26
View Existing Array
Create IM Volume
Create IME Volume
Create IS Volume
F1/Shift+1 = Help
0003
0003
0003
F1/Shift+1 = Help
Alt+N = Next Array
v6.08.05.00 (2006.08.02)
View the existing configuration.
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL Data on array disks will be deleted!
Create Integrated Striping array of
2 to 8 disks.
ALL Data on array disks will be deleted!
v6.08.05.00 (2006.08.02)
1 of 1
LSILOGIC Logical Volume 3000
IME
0
51498
Optimal
RAID
Hot
Disk
Spr
Yes
NO
Yes
NO
Yes
NO
C= Create an array
Chapter 5: RAID configuration
Drive
Pred
Size
Status
Fail
(MB)
Ok
No
34331
Ok
No
34331
Ok
No
34331
Advertisement
Table of Contents
