Table of Contents
Advertisement
7.
After selecting the hard disk drives, press
<F7> to create the RAID 0 set. A pop-up
window appears.
8.
Press <Y> to delete all data from the hard disk drives, or <N> to
continue creating the RAID set without deleting the data on the disks.
You will lose all data on the drives if you clear the disk data!
9.
The utility displays the created RAID 0 set. Press <Ctrl> + <X> to save
your settings and exit the utility.
5.2.4
Creating a RAID 1 set (Mirror)
To create a RAID 1 set:
1.
From the Define a New Array menu, select RAID Mode, then press
<Enter>. A pop-up menu appears.
2.
Use the up or down arrow keys to select
Mirroring, then press <Enter>.
3.
Press <TAB> to move to the Free Disks section.
4.
Highlight the hard disk drives that you want to add in the RAID set,
then press the right arrow key to select. The selected hard disk drives
appear in the Array Disks section. Repeat the process until all desired
hard disk drives are added.
5-6
Clear disk data?
[Y] YES
Mirroring
Striping
Stripe Mirroring
Spanning
RAID 5
Chapter 5: RAID configuration
[N] Cancel
Advertisement
Table of Contents
