Erasing A Program - Yamaha RCX40 User Manual

c
CAUTION
• Programs with an "RO (read
only) attribute cannot be erased.
When these programs must be
erased, change the attribute.
• To change the program attribute,
refer to "10.3.7 Changing the
program attribute".
10.3.5

Erasing a program

Unnecessary programs in the directory can be erased.
[Procedure]
1) In "PROGRAM>DIR" mode, use the cursor (↑/↓) keys to select the program to be
erased.
2) Press the (ERASE) key to enter "PROGRAM>DIR>ERASE" mode.
F 7
A check message appears on the guideline.
Fig. 4-10-22 Erasing a program
PROGRAM >DIR>ERASE
No. NAME
1 TEST1
2 *TEST2
3 PARTS100
4 TEST100
Erase program OK?
3) Press the (YES) key to erase the selected program.
F 4
Press the (NO) key if you want to cancel erasure.
F 5
After the program is erased, the lower program names move up.
Fig. 4-10-23 After erasing a program
PROGRAM >DIR
No. NAME
1 *TEST2
2 PARTS100
3 TEST100
4 TEST200
NEW
10. "PROGRAM" mode
<TEST1
LINE BYTE RW/RO
55 952 RW
50 907 RW
38 843 RW
100 1968 RW
YES NO
<TEST2
LINE BYTE RW/RO
50 907 RW
38 843 RW
100 1968 RW
80 1525 RW
INFO
>
4
>
61
4-