Monessen Hearth AVFL42NTSC Installation & Operating Instructions Manual page 16

AVFL Vent Free Fireplace
6. Remove five screws that secure the rear hearth in
place and remove from unit. Figure 14
7. Figure 15 shows bulb placement for front and rear
light bars. Insert bulbs in sockets.
8. With (twelve 20W) bulbs installed in front and rear
light bar, reinstall the rear hearth first with five
screws that were removed earlier. Figure 14
9. Reinstall the front hearth with nine screws removed
earlier. Figure 14
Figure 14–
Hearth Screw Locations
Figure 15–
Lower Light Bulb Location
Monessen • AVFL42 Installation Instructions • 20305467 Rev. B • 02/17
16
10. Place the rear porcelain panel back in place and
reinstall the left and right side using same screws
that were removed earlier. Replace the retainer clips
at bottom of porcelain panels.
11. Re-install the air deflection glass before proceeding
to add decorative media (next page).
Five Rear Hearth Screws
Nine Front Hearth Screws
Rear Lower Light Bulbs
Front Lower Light Bulbs
FINAL INSTALLATION