Turning The Power Off (Putting The Projector Into Standby Mode) - Sharp XV-Z21000 Operation Manual

Turning the Projector On/Off (Continued)
Turning the Power Off
(Putting the Projector into Standby
Mode)
1
Press
jector or
remote control, then press that
button again while the confi rma-
tion message is displayed, to
put the projector into standby
mode.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
• The power indicator on the projector
blinks in blue while cooling.
• The power indicator changes to red
when the projector fi nishes cooling.
-26
Downloaded From projector-manual.com Sharp Manuals
STANDBY on the pro-
STANDBY on the
□On-screen display
□
Info
• Do not unplug the power cord during projection or
cooling fan operation. This can cause damage due to
the rise in internal temperature, as the cooling fan also
stops.
• When connected to equipment such as an amplifi er, be
sure to turn off the power to the equipment connected
fi rst and then to the projector.