Replacing The Windows-Button Board; Procedure; Post-Requisites - Dell Inspiron 13 Service Manual

Replacing the Windows-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.

Procedure

1 Slide the Windows-button board cable into the connector on the Windows-
button board and press down the latch to secure the cable.
2 Adhere the tape to the connector on the Windows-button board.
3 Turn the Windows-button board and align the screw hole on the Windows-
button board with the screw hole on the display bezel.
4 Replace the screw that secures the Windows-button board to the display bezel.
5 Turn the display-panel assembly over.

Post-requisites

1 Follow the procedure from step 4 to step 5 in "Replacing the
2 Replace the display
3 Replace the battery.
4 Replace the base
92
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
display
Before
panel".