5
Peel off the tape on the Windows-button board connector, lift the latch and
disconnect the Windows-button board cable from the system board.
1
antenna cables (2)
3
display-cable bracket
5
Windows-button board cable
7
wireless card
6
Turn the computer over and open the display as far as possible.
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
7
Place the computer face down on a flat surface.
8
Peel off the tape that secures the display cable to the computer base.
9
Remove the screws that secure the display assembly to the computer base.
2
screws (2)
4
display cable
6
tape
69