5. OPERATION
5.18.2
How to stop the audio alarm
When a target enters (or exits) the target alarm zone, the target flashes and the alarm
sounds. The alarm message appears at the bottom of the screen. To stop the audio
alarm, press any key. When the target enters (or exits) the target alarm zone again,
the audio alarm sounds.
5.18.3
How to select the alarm type
You can set the target alarm to activate against targets entering or exiting the alarm
zone.
1. Press the MENU/ESC key to open the menu.
2. Use the Cursorpad ( or ) to select [Alert Settings] and press the ENTER key.
3. Use the Cursorpad ( or ) to select [Target Alarm 1] or [Target Alarm 2] then
press the ENTER key.
4. Use the Cursorpad ( or ) to select [In] or [Out].
[In]: When a target enters a target alarm zone, the alarm sounds.
[Out]: When a target exits a target alarm zone, the alarm sounds.
5. Press the ENTER key followed by the MENU/ESC key.
5-22
"In" target alarm
"Out" target alarm
In and Out target alarms
Alarm menu
Target Alarm options