Agilent 7500 ICP-MS ChemStation Operator's Manual
Tuning
Peristaltic Pump Program for Autotune
When Autosampler is selected in the Configuration task, setting of the peristaltic
pump program is required. Select Peri Pump Program for Autotune and the
Peristaltic Pump Program dialog box appears. You can set the peristaltic pump
speed or the stabilization time before and after Autotune. For more information
about peristaltic pump program, see the chapter "Setting the Peristaltic Pump
Program" in Chapter 5, "Creating a Method".
The Peristaltic Pump Program Window
4-115