Installation - Prem-I-Air EH1768 User Manual

Place the machine on flat and dry surface at least 50cm from walls or other
objects.
Installing Exhaust Hose
In normal use the EH1768 will produce hot air from
the rear exhaust port, this air can be vented through
an open window using the supplied vent kit. Connect
the exhaust hose as follows, extend the hose slightly
and screw into the rear of the unit. Extend the opposite
end of the hose slightly and screw on the fishtail adaptor,
clip the adaptor into the window slide bar.
Seat the window slide adaptor on the window sill
and lower the window to the adaptor. The window
slide can be adjusted horrizontally to fill the width of
the window.
The position of the exhaust pipe is very important, sharp bends and kinks should be avoided.

INSTALLATION

Exhaust Hose
Fish Tail Adaptor
Window slide Fitting
Correct
Correct
Correct
Incorrect
Window
Bar
Fishtail
Adaptor
Exhaust
Hose